Slope detection method by modulated speckle patterns

An optical technique for slope detection by using as storing medium a photorefractive BSO crystal is proposed. The technique relays in that a local tilt produced in a diffusing reflective surface can be mapped as a speckle transversal shifting in a plane perpendicular to the optical axis. The volume nature of the storing medium is quite adequate to highlight the speckle volume nature and its associated properties. Experimental results obtained by using a rubber vibrating membrane are presented.     

利用TeO2减少多模光纤出射场散斑干扰的研究

 为了减少多模光纤出射光场的散斑干扰,提出了把声光布拉格衍射效应所形成的不同衍射级耦合到多模光纤中,由于衍射级具有不同的偏振态,消弱了光场相干条件,进而在出射光场中消弱了散斑场的对比度,并通过对改变声场频率后得到的散斑场对比度的分析,证实了利用各向异性晶体TeO2能够控制散斑场对比度,改善出射场的高斯分布,得出了可以利用布拉格衍射效应减少散斑场干扰的可能性。     

Laser speckle movement caused by surface deformation and light wavelength change

When a surface is illuminated by laser, the field of diffusing reflective light can be described by Fresnel-Kirchhoff integration in the region of Fresnel. If the correlation, before and after the change of intensity field, is analysed by statistical method, three governing equations for variations of intensity field and speckle movement formulas can be obtained. In these equations, the surface motion, deformation and wavelength change are all considered to cause the speckle movement. The project supported by National Natural Science Foundation of China     

散斑与数字技术

本文总结了过去十年中散斑数字技术在力学、医学、无线电电子学和天文学中的应用和进展,以及在这些领域中所发展的各种新的理论、实验技术和实验方法。     

部分相干像面散斑技术

本文以光的部分相干性理论为指导,讨论了部分相干像面散斑(通常称为白光散斑)技术的关键.其结果可与激光像面散斑媲美.     

Focal plane wave-front sensing algorithm for high-contrast imaging

High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging. Supported by the National Natural Science Foundation of China (Grant No. 10873024)     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

基于多通道滤波技术的散斑条纹图正则化方法

在光测力学中,条纹图正则化是进一步提取条纹位相信息的重要基础。对于散斑条纹图来说,正则化的过程还需能够有效地抑制散斑噪声。本文提出一种基于多通道滤波技术的散斑条纹图正则化方法。通过使用多个Gabor滤波通道对散斑条纹图进行滤波,并且引入与条纹对比度有关的权重因子把各个滤波通道的滤波结果叠加起来,最终得到滤除了散斑噪声的正则化条纹图。数值模拟和实验结果表明,该方法在将散斑条纹图正则化的同时能够有效地滤除条纹图中的散斑噪声,为进一步提取条纹位相奠定了良好的基础。     

剪切光束成像技术对纵深目标的成像

剪切光束成像技术是一种能透过大气湍流对远距离目标实现高分辨率成像的主动成像技术.现有相关研究中所采用的目标均为二维平面目标,然而现实中的目标一般都具有三维形貌,目标纵深对回波信号产生的延迟或对成像质量产生不利影响.从剪切光束成像理论出发,在二维目标成像模型的基础上建立了三维纵深目标成像模型,并利用该模型研究了两剪切光与参考光间的频差及目标纵深对成像的影响.仿真结果表明,随着拍频的增大,重构图像质量逐渐下降.剪切光束成像技术可通过减小拍频来提高真实目标成像质量.     

花岗岩单轴压缩侧向变形及脆性破坏机制实验研究

为研究花岗岩侧向变形及脆性破坏机制,对花岗岩试件进行单轴压缩实验。利用动态应变采集系统、数字散斑相关方法(DSCM)和显微观测手段,记录并分析花岗岩试件在单轴压缩过程中的宏观侧向应变、局部侧向应变以及破裂面形貌,并与水泥砂浆试件的破坏过程对比,讨论了花岗岩脆性破坏机制。实验与分析结果表明:(1)花岗岩试件在加载初期发生侧向收缩变形,产生并发展于压密阶段,消失于线弹性阶段初期,这主要由于试件内部裂纹闭合造成的;此后,宏观侧向应变持续增长,当侧向应变与轴向应变之比接近0.5时试件破坏;(2)在峰值载荷前很长一段时间内,局部侧向应变在一定范围内波动,临近试件破坏时局部侧向应变最大值和最小值均出现较大幅度的波动,二者差值迅速增大,试件不均匀程度增大,最终导致试件破坏;(3)在峰值载荷前有无塑性屈服阶段是峰值载荷后脆性破坏程度的重要影响因素,而宏观裂纹的贯通程度是峰值载荷后应力降大小的决定因素。